INSTRUCTIONS
Shrinkburn Remedy
NOTE: Prior to application leave the board and Remedy solution in the sun for at least 30 minutes. Product results can be undesirable if it is too cold.
1. Using the dropper add the Shinkburn remedy to the end of the foam application brush until it is semi saturated. Be careful not to create drips.
2. Using the brush “paint” the surface of the board starting int he middle to avoid pooling solution to fall off of edges. Work your way around the board until the entire surface has a sheen.
3. Last, using the provided lint free cloth lightly wipe the surface to remove any excess remedy solution. Doing this twice is sufficient.
4. Now place the board in an area where it can be left undisturbed for at least 12 hours. 24 hours is ideal for full handing.
I SUGGEST NOT LOOKING AT THE BOARD UNTIL IT IS DONE (12 Hours). THIS WILL GIVE YOUT HE BEST BEFORE AND AFTER EFFECT!!